Let us address the second point first: I had always wondered why, in a schematics application (such as Eagle), when you placed an integrated circuit, for example, the pins were not displayed in sequence. Pins 12-18 might be, for example, in the upper-left-hand corner, while pins 1, 2, 8 and 11 might be in the lower left-hand corner, with pins 3-7, 9 and 10, might be scattered to what seemed like the wind.

I have lost the actual link, but somewhere recently I read a forum posting where it was patiently explained to we non-electrical engineers, that the pins are grouped by internal logical function rather than arranged physically. Also, many integrated circuits are available in a variety of formats – through-hole and surface mount and sometimes in a variety of surface-mount formats as well, where the pin numbers are not the same.

So, what I have been drawing have been diagrams that make it easier for me to breadboard (or perf-board) circuits. While those are beneficial, rarely can they be used for anything else.

My other major gripe with schematics programs (aside from the lack of choices in the Macintosh world) was the difficulty I had in making the wires actually attach. I can’t remember any specific applications, but I definitely remember that the large part of what turned me off to schematics applications was the actual difficulty I had in making wires connect.

Further, I had deluded myself into believing that I could create PCB files that could be sent to board manufacturing companies (called “Gerber files”) by using Illustrator. I had run across a set of instructions for converting Illustrator files to Gerber files and believed they would work.

And, after extensive experimentation, I found that they did … almost. The one part that doesn’t work is the ability to put text onto the silkscreen layer. If I were building PCBs exclusively for myself, that wouldn’t be a problem, but I have envisioned that the DMX/LED matrix circuit I hope to one day design will be something that I can give back to the community, and for those types of boards, you really need to indicate component positions with silkscreened text.

So, that was out.

A few weeks back I stumbled across a conversation on a forum where folks were talking about a schematics and PCB application called DipTrace. Most of the comments were positive; there were plenty of people who said it was easy to use; it had a free version for non-profit use that topped out at 300 pins (about twice what I’d need) and it created Gerber files.

The only downside was that it ran under Windows (patooie!), not on the Mac. I do have an old Compaq sitting here that I use to test web sites out on and to run the Christmas lights, so I thought I could actually break down and try to use DipTrace on it.

I was able to go through the tutorial in about an hour and had both a schematic and a Gerber file (albeit of only seven components, but nonetheless …) to show for it.

I’ve recently begun work on a new matrix circuit and rather than draw it in Illustrator, I decided to use DipTrace. I’ll post when I have something I feel comfortable showing.

Since we last spoke I threw the LED matrix project out to the Do It Yourself Christmas community to see if I could get some others interested and willing to help. I got a couple of bites and have spent the last few months working with them, trying to further my goal of building an LED star that has 60 lamps, three colors and can be driven by DMX-512. You can see the discussions.

The current circuit is based on the Atmel ATTiny2313, two 74HC595 shift registers and a ULN2803 Darlington array to handle sink current (plus an RS485 chip to handle DMX signals and associated resistors and capacitors).

Unfortunately, I haven’t been able to make as much progress as I would have liked. I have a breadboarded circuit that works, but unfortunately, it works backwards. That is, when the DMX application sends a signal to an LED to light, it is dark; when there is a DMX signal but sent to have the LED dark, it lights.

Big brains in the DIYC community haven’t been able to figure this one out, so for now I remain mired in my own ignorance.

That’s all I know right now. Stay tuned for more information.

That said, I also focused a bit in recent months on my Christmas lights show and have documented there a few of the DIY efforts not previously chronicled.

Take a gander at:

• The Lynx DMX SSR4 controller
• The Lynx MR16 controller
• The LED-Triks electronic sign

Have a happy new year and expect to hear more from the workshop later this winter.

A few months back it became clear that this electronics thing wasn’t going to go away. I was, in fact, going to be building more circuits over time and perhaps even designing them. I had chronicled the lighting of the backyard railroad at 45mm.com, while the Christmas lights project was at PacificaLights.info.

But that scattered stuff all over the map and I didn’t have a good place to put things that fell in between. Plus, I had never installed WordPress and was interested in giving it a try (we won’t talk about the ill-fated, three-day attempt to get Movable Type to work).

Plus, I had all these iterations of the domain name dmcole — so why not use one for its own content?

I don’t expect to post here often; I don’t expect the material to be earth-shattering. I do expect it to be of mild interest to those who are interested in do-it-yourself digital lighting solutions and those who are microcontroller hobbyists.

Now, I’ve set up by blog and I’m ready to go.

Onward.

\dmc